Aastra Telecom IP Phone - Manual (Page 108)

100 Model 57i IP Phone User Guide
Line Keys and Softkeys
Setting Services Key
Use the following procedure to configure a Services softkey on the 57i phone. The
following illustration shows the top softkeys on the 57i
.
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module <N>.
2. Click on the Bottom tab or the Top tab.
3. Select from "Key 1" through "Key 20" on the bottom tab.
or
Select from "Key 1" through "Key 10" on the top tab.
4. In the "Type" field, select Services.
5. In the "Label" field, enter a label to apply to this softkey.
6. In the "Line" field, select the line you want to apply to this softkey. Valid values
are 1 through 9.
7. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
8. Click to save your changes.
Aastra Web UI
Note: By default, Key 1 on the top set of softkeys is configured for Services.