Aastra Telecom IP Phone - Manual (Page 181)

Model 57i IP Phone User Guide 173
Additional Features
Message Waiting Indicator
You can configure the Message Waiting Indicator (MWI) to illuminate for a specific
line or for all lines. For example, if you configure the MWI LED on line 3 only, the
LED illuminates if a voice mail is pending on line 3. If you configure the MWI LED
for all lines, the LED illuminates if a voice mail is pending on any line on the phone
(lines 1 through 9).
You configure the MWI indicator using the Aastra Web UI.
Configuring Message Waiting Indicator
Use the following procedure to configure the message waiting indicator on a specific
line or on all lines on the IP phone.
1. Click on Basic Settings->Preferences->General.
2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If
required, change the setting to a specific line by selecting a line from the list. Valid
values are All and lines 1 through 9.
3. Click to save your settings.
Aastra Web UI
Note: "Message Waiting Indicator Line" parameter is set to ALL lines by
default.