Aastra Telecom IP Phone - Manual (Page 29)

Model 57i IP Phone User Guide 21
Methods for Customizing Your Phone
The following categories display in the side menu of the Aastra Web UI: Status,
Operation, Basic Settings.
Headings Descriptions
Status The Status section displays the network status and the MAC address
of the IP phone. It also displays hardware and firmware information
about the IP phone. The information in the Network Status window is
read-only.
Operation User Password - Allows you to change user password.
Phone Lock - Allows you to assign an emergency dial plan to the
phone, lock the phone to prevent any changes to the phone and to
prevent use of the phone, and reset the user password.
Softkeys and XML - Allows you to configure up to 6 top softkeys and
6 bottom softkeys with functions identified in the list below. You can
configure up to 10 functions on the top softkeys and up to 20 functions
on the bottom softkeys.
Available Functions for Softkeys
Expansion Modules - Allows you to configure an additional 36
softkeys with a 536M Expansion Module, or an additional 60 softkeys
with a 560M Expansion Module if an it is attached to the phone. This
option displays on the side menu of the Aastra Web UI only if an
Expansion Module is attached.
Note: Not all functions in the table above apply to the Expansion
Modules.
Directory - Allows you to copy the Callers List and Directory List from
your IP phone to your PC.
Reset - Allows you to restart the IP phone when required.
• none • sprecode
• line • park
• speeddial • pickup
• do not disturb (DND) • Last Call Return (lcr)
• Busy Lamp Field (BLF) • Directory
• BLF List • Callers List
• Auto Call Distribution
(ACD) • Intercom
• Directed Call Pickup • Services
• Extensible Markup
Language (XML) • Phone Lock
• flash • Empty