Controlled Products Systems Group AE-500 - Manual (Page 22)

22
System Options (Continued)
Welcome Display Text
The AE-500 display will show a visitor a welcome message alternating with
instructions on how to call a resident. The welcome message can be customized
to suit the installation.
✦ NOTE: When changing the welcome display, programming the AE-500
from a computer is the preferred method. Refer to the “Programming from
the Local Keypad” section of these instructions for details on alphanumeric
entry from the keypad.
1. If not already in Programming Mode use the local keypad to enter the
master password and access programming.
2. Press
3. Enter the new text for the top line of the display (up to 16 characters).
4. Press
5. Enter the new text for the bottom line of the display (up to 16 characters).
6. Press
7. Exit Programming Mode if all programming is complete.
Automatic Telephone Answer
The factory setting will allow the system to detect a ring signal on the telephone
line and answer the call. The automatic answer feature can be turned off,
although remote programming and remote control of the system will no longer
be possible.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Press
3. Select the option for automatic telephone answering:
• Enter 0 to turn OFF automatic telephone answering.
• Enter 1 to turn ON automatic telephone answering.
4. Press
5. Exit Programming Mode if all programming is complete.
Speaker Chirp on Keystrokes
The factory setting will cause the speaker to chirp when each key on the local
keypad is pressed. The speaker chirp can be turned off.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Press
3. Select the option for keystroke speaker chirps:
• Enter 0 to turn OFF the keystroke speaker chirps.
• Enter 1 to turn ON the keystroke speaker chirps.
4. Press
5. Exit Programming Mode if all programming is complete.
Speaker Tone on Relay Channel “A” Activation
The factory setting will not cause the speaker to sound a tone when access is
granted with Relay Channel “A”. The tone can be turned on if desired.
1. If not already in Programming Mode, connect by telephone or use the
local keypad. Enter the master password and access programming.
2. Press
3. Select the option for relay activation tone:
• Enter 0 to turn OFF the relay activation tone.
• Enter 1 to turn ON the relay activation tone.
4. Press
5. Exit Programming Mode if all programming is complete.
PPN 57
57#LINE 1#LINE 2#
LINE 1 = UP TO 16 CHARACTERS TEXT
LINE 2 = UP TO 16 CHARACTERS TEXT
WELCOME DISPLAY TEXT
FACTORY SETTING: LINEAR ACCESS TELEPHONE ENTRY
PPN 61
61#ANSWER#
ANSWER = 0 FOR AUTO ANSWER OFF
ANSWER = 1 FOR AUTO ANSWER ON
AUTOMATIC TELEPHONE ANSWER
FACTORY SETTING: AUTO ANSWER ON
PPN 62
62#CHIRP#
CHIRP = 0 FOR KEYSTROKE CHIRP OFF
CHIRP = 1 FOR KEYSTROKE CHIRP ON
SPEAKER CHIRP ON KEYSTROKE
FACTORY SETTING: KEYSTROKE CHIRP ON
PPN 63
63#TONE#
TONE = 0 FOR RELAY TONE OFF
TONE = 1 FOR RELAY TONE ON
SPEAKER TONE ON RELAY "A"
FACTORY SETTING: RELAY TONE OFF