Multichannel Systems LTP-Director Manual - Manual (Page 40)

LTP-Director Manual
36
Test Stimulation
After pressing the start button besides "Data Acquisition", the preliminary experiment is running.
Stimuli with the user defined parameters will be delivered continuously on one or both
stimulation pathways. The sweeps are counted until you stop the recording manually by pressing
the stop button. In "Test Mode" data is displayed but not recorded.
Important: Changing the stimulation electrodes or the electrodes selected for online analysis
is only possible in test mode!
After selecting stimulation and analysis electrodes, press the ”Measurement” button to switch
to "Measurement Mode". Please read chapter "Data Display Measurement Mode".
5.1.7 Automated Perfusion System
The PPS5 is a perfusion system with five peristaltic pumps and optical fluid control
from Multi Channel Systems which can be automatically controlled by the LTP-Director.
Test Mode
Click “Hardware” under “Settings” and select the “Perfusion” tab. Select “PPS5”
from the drop down menu for the manually control of the automated perfusion.