Multichannel Systems LTP-Director Manual - Manual (Page 52)

LTP-Director Manual
48
5.2.6 Experimental Protocol in Measurement Mode
Once the stimulation parameters and the electrodes to be analyzed in measurement mode
are selected, the outline of the experiment must be defined. Please remember, if you press
the "Start" button, data is recorded. If you just want to test the stimulation, please use the
"Preparation" menu.
Different experimental phases can be selected or deselected to define the course of the
experiment. Clicking the corresponding icon opens a dialog with the settings for each phase.
Each dialog contains an enable / disable option. If a phase is disabled, the icon appears grey
and crossed out. The user is free to choose any sequence of experimental phases.
The Report Sheet will be generated automatically at the end of the experiment.