Multichannel Systems LTP-Director Manual - Manual (Page 81)

77
9 Troubleshooting
9.1 About Troubleshooting
The following hints are provided to solve special problems that have been reported by users.
Most problems occur seldom and only under specific circumstances. Please check the mentioned
possible causes carefully when you have any trouble with the product. In most cases, it is only
a minor problem that can be easily avoided or solved.
If the problem persists, please contact your local retailer. The highly qualified staff will be glad
to help you. Please inform your local retailer also, if other problems not mentioned here occur,
even if you have solved the problem on your own. This helps other users, and it helps MCS to
optimize the instrument and the documentation.
9.2
Error Messages
LTP-Director: Data Display Test Mode
If you start the LTP-Director in Test Mode, the software tries to connect the MEA1060 amplifier.
Please select the correct COM port from the drop down menu "MEA-BC Port" in the Control
Window for connecting the MEA amplifier.
LTP-Director: Data Display Test Mode
If you start the LTP-Director in Test Mode, the software tries to connect the STG. Please select
the correct STG from the drop down menu "STG" in the Control Window for connecting the STG.