Multichannel Systems STG4002 Manual - Manual (Page 48)

Stimulus Generator 4002 Manual
44
7.3
Display Tools
 Several tools are provided to optimize the graphical presentation of the stimuli. If you later
choose to display channels, the axes of the new displays are set to the default values.
 The time axis can display only positive values.
 The y-axis of the Sync Out channels cannot be adjusted, because only values of 0 and 1
are available for these channels.
Enable scrolling Scroll the axes by clicking and dragging with your mouse.
Enable scaling Zoom the axes by clicking and dragging with your mouse.
Zoom out Reduces the time scale.
Zoom in Magnifies the time scale.
Reset Resets the axes of all channels to the default values.
Size to fit Adjusts the ranges to fit the largest displayed stimulus.
Show measure
tool A horizontal bar is shown that displays the current / voltage and the
time value of the intersection point. Drag the bar with the mouse.
Scrolling the axes
You can scroll the stimuli forward and backward along the time axis, and up and down along
the voltage / current axis.
1. Click to enable the scrolling.
2. Click the axis you like to scroll. The mouse pointer becomes a hand.
3. While holding down the mouse button, move the axis to the left and right, or up and down.
- OR -
You can use the keyboard: Press LEFT ARROW or DOWN ARROW to move the axis to the left
(down), RIGHT ARROW or UP ARROW to move the axis to the right (up).
- OR -
Use the PAGE UP and PAGE DOWN keys for a faster scrolling (larger steps): PAGE DOWN
to move to the left (down), PAGE UP to move to the right (up).