Multichannel Systems STG4002 Manual - Manual (Page 97)

Troubleshooting
93
ASCII Import
These error messages relate to a wrong file format. Please see chapter "Supported File Format"
for more information.
The named line contains
an unexpected character.
The channel number
specification has to precede
the data. The channel
number either lacks or the
specified number does not
exist, for example number
13.
Each data column must
have a header (value, time,
or repeat).
The number of data columns
has to be consistent for all
lines in a given ASCII file (for
example, value, time, value,
time). This error message
indicates that there is a
current/voltage value or a
time point missing in line 12.
The ASCII file contains
current/voltage values
outside the STG's range.
For example, if the STG's
output range is +8000 mV,
all values above +8000 mV
are set to +8000 mV.