Multichannel Systems STG4002 Manual - Manual (Page 67)

Synchronizing Events
63
8. Check all stimulus protocols before download. Please make sure that you have selected
all necessary channels under Download Channel for each file separately.
9. Download the files onto the STG by clicking Download on the STG menu.
10. The stimulation as specified in the selected MC_Stimulus files will now be triggered
by the selected trigger inputs.
Triggered action when channel(s) still active
You can define what action should be taken when any of the channels assigned to the trigger are
still active. In addition, you can also define what action should be taken when any of the channels
not assigned to the trigger event are still active. Please click the expand button to show
the advanced options:
 Stop: A following trigger input stops the stimulation on the assigned channels if at least one
channel that has been assigned to this particular trigger is still active in the moment of the trigger
event. The trigger event starts stimulation only if no channel that has been assigned to this
trigger is active.
 Restart: The stimulus protocols on all channels assigned to this trigger are started at the trigger
event, regardless of the activity on these channels.
 Ignore: The trigger event is ignored when any channel assigned to this trigger is active. The
trigger event starts stimulation only if no channel that has been assigned to this trigger is active.
Example:
File A is assigned to trigger 1 and file B to trigger 2. Consider the following two situations:
 Trigger 1 is activated, but channel 2 in file A is still active. As channel 2 from file A is assigned to
trigger 1, the settings defined for "on channel assigned to same trigger" would be applicable.
 Trigger 1 is active, but channel 2 in file B is still active. As channel 2 from file B is assigned
to trigger 2, the settings defined for "on channel assigned to other trigger" would be
applicable.