Athena Technologies PLATINUM C10 - Manual (Page 20)

19
4 - Operations
4.2 DISPLAY
When the display operation is
selected, the controller presents
automatically all the most impor-
tant parameters and configuration
information.
During the operation, the para-
meters values cannot be modi-
fied by the user
After 2 sec from the end of the
operation, the controller flashes the
display and returns to the normal
operating conditions.
4.2.1 OF THE PROCESS
VARIABLES
4.2.2 OF THE CONFIGURATION
CODES
270.5
274.8
Unit
s.p.
Out
63.0
°C
Operator
mode
Engineering
units
[1]
Setpoint
Control
output
[2]
Note
[1] See table page 27
[2] This display is not presented if the
instrument has been configured as
an On - Off controller
2002
274.8
Unit
Conf
rel.
00A
°C
Hard
3000
Operator
mode
Engineering
units
[1]
Basic
product code
(see page 15)
Configuration
code
(see page 16)
Software
release
number
after
0,5 sec. after
0,5 sec.
Example:
C10 - 3000 - 2002 / Release 00A