Alpine DVA-7996 - Manual (Page 15)

13
-EN
Quick Searching Function
You can easily select tracks and files.
1
Press the SOURCE button to set the desired source
mode.
(CD mode is explained here as an example)
2
When setting the CD mode, press and hold the Q.S.
button for at least 2 seconds. The mode changes to the
Q.S. (Quick Search) setting.
3
Select a desired track by turning the Rotary encoder
to the right or left.
•
CD/Changer mode: Track can be selected.
•
XM mode: Channel can be selected. (It is not
possible to select in the FM/AM tuner mode)
•
MP3 mode: File number can be selected.
4
When the setting is completed, the Q.S. mode is
canceled by pressing the Rotary encoder.
NOTE
The Q.S. mode is automatically canceled after 10
seconds if no buttons are pressed during step 2 and 3.
Displaying Time
1
Press the CLK (clock) button repeatedly until the time
is displayed.
Each press changes the modes as follows:
Radio mode
CD Player/Changer modes
NOTES
•
Selecting any tuner or CD function while in the clock priority
mode will interrupt the time display momentarily. The
function selected will be displayed for about 5 seconds before
the time returns to the display.
•
When the power is off but the ignition key is on, press the CLK
button to display the time.
Setting Time
1
In the Clock priority mode, press and hold the CLK
(clock) button for at least 3 seconds while the time is
displayed. The time indication will blink.
2
Turn the Rotary encoder to adjust the hours while the
time indication is blinking.
3
When the hour has been adjusted, press the Rotary
encoder.
4
Turn the Rotary encoder to adjust the minutes while
the time indication is blinking. The time is automatically
set 5 seconds after the minute adjustment. The time
can also be manually set by pressing the Rotary
encoder.
Radio frequency
Clock priority
mode
TITLE mode
Playing time
mode
TITLE mode
TRACK
TEXT mode
Clock priority
mode DISC TEXT
mode