Alpine DVA-7996 - Manual (Page 18)

16
-EN
Setting the Sound Quality of the
Tuner
The DVA-7996 incorporates the MAX TUNE SQ for the
highest quality tuner audio. Moreover, you can choose
between three settings to suit your own personal sound
preferences and usage.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select “NORMAL
or HI-FI or STABLE.”
3
Press the BAND button to switch the TUNER mode.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTES
•
The initial setting at the factory is “NORMAL.”
•
If you find the sound is very noisy while listening to the tuner
in the HI-FI mode, we recommend you change to the
NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTES
•
“MP3 File Selection” and “Playing MP3 data” in the
“SETUP” mode section are described in MP3 Operation on
page 25.
•
Audio-related setup function operations cannot be performed
using the SETUP button on the remote control unit.
Changing Lighting Color
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select “AMBER”.
3
Press the BAND button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4
Press the SETUP button to set the selected mode.
SETUP Operation
MODE/Rotary encoder
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head lights of
the vehicle ON. This mode is useful if you feel the unit's
backlighting is too bright at night.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select
“DIM”(DIMMER).
3
Press the BAND button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANUAL.
4
Press the SETUP button to activate the normal mode.
Subwoofer On and Off
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the DN or UP button to select “SUB-W
(Subwoofer).”
3
Press the BAND button to toggle mode between
SUB-W ON or LINK and SUB-W OFF.
SUB-W ON: The subwoofer output is set to ON
regardless of whether the rear DVD function (page 34)
is set to ON or OFF.
SUB-W LINK: The subwoofer output is set to ON when
the rear DVD function (page 34) is set to OFF.
The subwoofer output is set to OFF when the rear DVD
function (page 34) is set to ON.
SUB-W OFF: The subwoofer output is set to OFF
regardless of whether the rear DVD function (page 34)
is set to ON or OFF.
NOTES
•
The initial setting at the factory is subwoofer ON.
•
The SUB-W LINK cannot be selected when our company's
external processor is connected.
4
Press the SETUP button after setting the SUB-W ON
or LINK.
5
Press the MODE button repeatedly to select the
SUB-W mode.
Press the DN or UP button after selecting the
SUB-W mode, and the subwoofer output phase is
toggled SUBW NOR (0
°)
or SUBW REV (180
°).
6
Turn Rotary encoder until the desired sound is
obtained in each mode.
BAND SOURCE
DN UP
SETUP
NORMAL HI-FI STABLE
SUB-W
VOLUME DEFEAT FADER
BALANCE