Alpine DVA-7996 - Manual (Page 61)

59
-EN
System Example
● Connect the Ai-NET compatible equalizer and the changer
System switch EQ/DIV
In this case, tone control operations can
only be performed on the equalizer. (Tone
bypass function)
**
Set the system switch to “NORM” when only a
changer is connected (when the Ai-NET
compatible equalizer is not used).
(L)
(R)
(L)
(R)
(L)
(R)
Ai-NET input connector
Ai-NET Cable
Ai-NET Cable
Ai-Net compatible
equalizer
(sold separately)
RCA Extension cable
Remote Turn-on Lead
Remote Turn-on
Lead
Remote Turn-on Lead
Front
Output
Rear
Output
Front
Input
Rear
Input
Sub-
woofer
Output
Front
speaker
Rear
speaker
Input
Subwoofer amplifier
(sold separately)
Compatible
Ai-Net changer
(sold separately)
(White/Blue) (White/Blue)
*
DVA-7996
Ai-NET Cable
Ai-NET Cable
TV monitor
(sold separ-
ately)
Video input terminal
Ai-NET output terminal
Audio input terminal
TV tuner box
(sold separately)
RCA Extension cable
RCA Extension cable(video)
(Included)
Ai-NET Cable
Fiber digital
Input terminal (for head unit)
Fiber optic Cable
Remote control output Lead
(White/Brown)
Ai-Net compatible audio
processor (sold separately)
(Fiber digital compatible)
Fiber digital input
terminal
(for changer)
Fiber digital cable
Only connect fiber digital
compatible CD changer
Ai-NET compatible
CD changer
(sold separately)
**
DVA-7996
**
Aux out Cable
To Digital output
terminal
Remote control
input lead
(Yellow)
*
System switch EQ/DIV
Tips
•
When the fiber digital compatible product is
connected, it is necessary to set the mode of
this unit. Refer to “Setting the Digital Output”
(page 18) and set to ON. Then refer to
“Optical Digital Input Selection for an External
Audio Processor” (page 18) and switch the
setting.
•
* When connecting with PXA-H510 :
• Connect the fiber digital input terminal to
the DVD.
• DVA-7996, DVA-5200 or DVA-5205 cannot
be connected simultaneously when fiber
digital is in use.
Tips
● Connect the Ai-NET compatible audio processor (Fiber digital compatible) and TV monitor/changer
* An amplifier with a built-in low pass filter is required.
** Tone bypass function: With this function, the tone is
adjusted using the equalizer’s tone control circuit
(without using the head unit’s tone control circuit).