Changing the country code setting, Fr es de se it – Alpine DVA-7996 User Manual

Page 39

Advertising
background image

FR

ES

DE

SE

IT

37

-EN

Changing the country code setting

Set the country code when setting the rating level
(Parental lock).

NOTE

When the settings are changed, the old settings are
overwritten. Make a note of the current settings before
making changes. The settings are not cleared even when
the vehicle’s battery is disconnected.

US : 8583

NOTES

For some discs, the picture may not be set to the
selected screen size. (For details, refer to the
explanation on the disc’s jacket.)

Press the RTN button to return to the previous screen.

4

Press and hold the SETUP button for at least 2
seconds.
The settings are stored and the set up mode is
canceled.

1

In the stop mode, press and hold the SETUP
button for at least 2 seconds.
The setup menu appears on the monitor screen.

NOTE

This operation cannot be performed in the PRE-STOP
mode. When the disc is being played, press the
button
twice to set the stop mode.

2

Use the Joystick to select “COUNTRY CODE”,
then press the ENTER button.

3

Press the ENTER button to reset the country
code.

4

Use keys “0” to “9” to input the 4-digit country
code, then press the ENTER button.

Operations for making the “DVD Default
Settings (SETUP)” cannot be
performed using the SETUP button on
the main unit.

Tips

4 : 3 PAN-SCAN

Select this when connected to a conventional 4:3
size monitor. The picture will fill the entire TV
screen. However, due to the mismatch in aspect
ratio, parts of the movie at the extreme left and
right sides will not be visible (when playing a
16 : 9 size movie).

Select this when connected to a wide screen TV.
This is selected upon shipment from the factory.

16 : 9 WIDE

NOTES

For the country codes, refer to “List of country
codes” (Pages 49, 50).

Can be erased one digit at a time each time the DEL.
button is pressed. Moreover, press for at least 2
seconds to delete all digits.

Press the RTN button to return to the previous screen.

5

Press and hold the SETUP button for at least 2
seconds.
The settings are stored and the set up mode is
canceled.

Advertising