Alpine DVA-7996 - Manual (Page 17)

15
-EN
Titling Discs/Stations
It is possible to title your favorite Disc's (CD, DVD, Video
CD) or radio stations.
You cannot input titles on MP3 discs.
1
Press the TITLE button and select the title display
mode.
For details, see “Displaying the Title/Text” (page 14).
2
Press and hold the TITLE button for at least 3 seconds.
The first character will blink.
Press the BAND button to select the characters/
symbols.
3
Turn the Rotary encoder to select the desired letter/
numeral/symbol available for naming.
4
Press the Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next
letter or symbol of your title.
5
Repeat the steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character, automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters to complete your title, the
4th character space will be blinking. Go to step 6 to
complete the title.
6
Press the TITLE button to record the title.
NOTES
•
You can enter 24 radio station titles and 18 Disc titles on this
unit. If you try to store beyond the limit, the audio display will
show "FULL DATA". At this point, no more titles can be
stored.
•
The CD Changer title length or memory capacity varies
depending upon the model being used.
•
To input a new title, one of the previously inputted titles must
first be deleted.
•
When you want to erase a title, enter the “ ” symbol into all
spaces.
•
The operations described in steps 3 to 5 must be made within
10 seconds. The input mode will be cancelled if no action is
taken for over 10 seconds.
•
Removing power from the unit may delete these titles. Use
caution when manipulating the power cord.
Erasing Disc Title/Station Title
1
Press the TITLE button to select the titling mode. Then,
press and hold for at least 3 seconds.
2
Press and hold the button for at least 2 seconds to
activate the title scanning mode. The title in the display
will blink.
3
Press the DN or UP button repeatedly until the
title you want to erase is displayed.
4
Press and hold the button for at least 2 seconds to
erase the title displayed.
5
Press the TITLE button to cancel the title erasing
mode.
NOTES
•
You cannot erase CD-TEXT.
•
The operations will be cancelled if no action is taken for over
10 seconds.
Upper case Lower case Numeral/Symbol