Northbridge configuration, Init. graphic adapter priority [pci/agp, Dram cas select [slow – Asus Terminator 2 Barebone System T2-R User Manual
Page 100: Agp aperture size [64mb, Uma frame buffer size [64mb
100
Chapter 5: BIOS setup
NorthBridge Configuration
Init. Graphic Adapter Priority
[PCI/AGP]
DRAM CAS Select
[Slow]
AGP Aperture Size
[64MB]
UMA Frame Buffer Size
[64MB]
Select which graphics
controller to use as the
primary boot device.
Init. Graphic Adapter Priority [PCI/AGP]
Allows selection of the graphics controller to use as primary boot device.
Configuration options: [PCI/AGP] [AGP/PCI]
DRAM CAS Select [Slow]
Allows you to select DRAM CAS speed.
Configuration options: [Slow] [Fast]
AGP Aperture Size [64MB]
Allows you to select the size of mapped memory for AGP graphic data.
Configuration options: [32MB] [64MB] [128MB] [256MB] [512MB]
UMA Frame Buffer Size [64MB]
Allows you to select the size of the onboard graphics controller memory
use. Configuration options: [8MB] [16MB] [32MB] [64MB] [128MB] [None]