Asus Terminator 2 Barebone System T2-R - Manual (Page 28)

28 Chapter 2: Basic installation
2.6 Installing a DIMM
The motherboard comes with two Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 2GB
system memory using unbuffered non-ECC PC3200/2700/2100 DIMMs.
Qualified DDR400 vendors
This table lists the memory modules that have been tested and qualified
for use with this motherboard.
256MB MICRON MT8VDDT3264AG-40BC4 MICRON 46V32M8
256MB PSC AL5D8B53T-5B1K PSC A2S56D30BTP
256MB TwinMOS M2G9108AIATT9F081AADT TwinMOS TMD7608F8E50D
256MB SAMSUNG M368L3223DTM-CC4 SAMSUNG K4H560838D-TCC4
256MB SAMSUNG M368L3223DTM-CCC SAMSUNG K4H560838D-TCCC
256MB Kingston KVR400X64C25/256 Winbond W9425088H-5
256MB Transcend TS32MLD64V4F3 MOSEL V58C2256804SAT5
256MB CORSAIR CMX256A-3500C2PT –– ––
256MB Infineon HYS64D32300GU-5-B Infineon HYB25D256800BT-5
Size Vendor Part Number Chip Brand Chip Number
2.6.1 Memory configurations
You can install 64MB, 128MB, 256MB, 512MB, and 1GB DDR DIMMs into
the DIMM sockets.
Obtain DDR DIMMs only from ASUS qualified vendors. Refer to the
table below. Visit the ASUS website (www.asus.com) for the latest
Qualified Vendors List.
• This motherboard supports one single-sided PC3200 (DDR400)
DIMM per channel only.
• This motherboard may only detect PC2700 (DDR333) system
memory when you install double-sided PC3200 (DDR400)
DIMMs.
• Install only identical (the same type and size) DDR DIMMs in
DIMM_A and DIMM_B.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, obtain memory modules from the same vendor.
• This motherboard only supports x4, x8, x16 chips/per module DDR
DIMMs.