Asus Terminator 2 Barebone System T2-R - Manual (Page 105)

105 ASUS Terminator 2 barebone system
5.5 Power menu
The Power menu items allow you to change the settings for the Advanced
Power Management (APM). Select an item then press <Enter> to display
the configuration options.
5.5.1 Suspend Mode [S1&S3]
Allows you to select the ACPI state to be used for system suspend.
Configuration options: [S1 (POS) Only] [S1&S3]
5.5.2 Repost Video on S3 Resume [Yes]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [Yes] [No]
5.5.3 ACPI 2.0 Support [No]
Allows you to add more tables for ACPI 2.0 specifications.
Configuration options: [No] [Yes]
5.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the ACPI support in the ASIC. When set to
Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
Suspend Mode [S1&S3]
Repost Video on S3 Resume [Yes]
ACPI 2.0 Support [No]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select the ACPI state
used for System Suspend.