3 removing the cover – Asus Terminator 2 Barebone System T2-R User Manual
Page 23
Advertising
23
ASUS Terminator 2 barebone system
3.
Slightly pull the cover toward
the rear panel until the side tabs
are disengaged from the
chassis.
4.
Lift the cover, then set aside.
2.
Use a Phillips screw driver to
remove the cover screws. Keep
the screws for later use.
2.3
Removing the cover
To remove the cover:
1.
On the rear panel, locate the
three screws that secure the
cover to the chassis.
1
1
1
2
2
4
3
2
3
Advertising
This manual is related to the following products: