Asus Terminator 2 Barebone System T2-R - Manual (Page 19)

19 ASUS Terminator 2 barebone system
1.5 Internal components
The illustration below is the internal view of the system when you remove the
top cover and the power supply unit. The installed components are labeled
for your reference. Proceed to Chapter 2 for instructions on installing other
system components.
1. Optical drive
2. Empty 5.25-inch drive bay
3. Floppy disk drive
4. Front panel cover
5. Hard disk drive tray
6. Chassis fan 7. ASUS P4R8T motherboard
8. DIMM sockets
9. CPU fan and heatsink assembly
10. AGP slot
11. PCI slot (with an installed
PCI card)
3
9
10
6
5
4
11
7
8
1
2
22. Wireless LAN adapter antenna connector. (Commercial Deluxe
models only.) This connects the dipolar antenna of the wireless LAN
adapter.
23. Link LED. (Commercial Deluxe models only.) This yellow LED lights
up when the wireless LAN adapter radio is on but has no activity.
24. AIR LED. (Commercial Deluxe models only.) This green LED blinks
when the wireless LAN adapter is transmitting or receiving data.
See page 58 for the wireless LAN adapter LED indications.