Bosch MUM56S40 - Manual (Page 19)

Robert Bosch Hausgeräte GmbH 19
Operating positions Fig.

^ннЙенбзе>
_ЙСзкЙ=зйЙк~нбеЦ=нЬЙ=~ййдб~åÅÉI=~нн~ЕЬ=нЬЙ=íççäL
~ЕЕЙллзку=нз=нЬЙ=ЕзккЙЕн=ЗкбоЙ=~еЗ=бе=нЬЙ=ЕзккЙЕн=
йзлбнбзе=~еЗ=йд~ЕЙ=бе=нЬЙ=зйЙк~нбеЦ=йзлбнбзе=
~ЕЕзкЗбеЦ=нз=нЬбл=н~ÄäÉK
qЬЙ=лпбоЙд=~кг=гмлн=ДЙ=ЙеЦ~ЦЙЗ=бе=ЙоЙку=
зйЙк~нбеЦ=éçëáíáçåK
Selecting the operating position:
 Press the Release button and move
the swivel arm.
Support movement with your hand.
 Move the swivel arm until it engages
in the required position.
* Insert/remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
Operating the appliance
^ннЙенбзе>
aз=езн=зйЙк~нЙ=нЬЙ=~ййдб~еЕЙ=пбнЬзмн=~е=
~ÅÅÉëëçêóLíççä=бе=нЬЙ=зйЙк~нбеЦ=éçëáíáçåK
aз=езн=зйЙк~нЙ=нЬЙ=~ййдб~еЕЙ=ÉãéíóK=
aз=езн=ЙсйзлЙ=~ййдб~еЕЙ=зк=~ЕЕЙллзкбЙл=нз=ЬЙ~н=
ëçìêÅÉëK=m~кнл=~кЙ=езн=гбЕкзп~îÉJë~ÑÉK
 Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.
Preparation
 Place the base unit on a smooth, clean
surface.
 Pull out the power cord (Fig.
).
MUM52../MUM54..
Cord store:
Pull out cable to the required
length.
MUM56..
Automatic cord winder:
Pull out the cord in one go to the
required length (max. 100 cm)
and slowly release; the cord will
then lock.
Reducing the cord length:
Pull gently on the cord and allow it to roll
up to the required length. Then gently pull
the cord again and slowly release; the cord
will then lock.
en
Note
The swivel arm features an “Easy Armlift”
function which supports the upwards
movement of the swivel arm.
Position Drive MUM52.. MUM54..
MUM56..
1 7
1–4
1–4
1–2
1–7
1–7
1–3
2 7
*
– –
3 6
2–4 3–7
2–3 3–5
4
9 3–4 5–7
7 3–4 5–7
oáëâ=зС=беамку>
aз=езн=белЙкн=г~бел=йдмЦ=менбд=~дд=йкЙй~к~нбзел=
Сзк=пзквбеЦ=пбнЬ=нЬЙ=~ййдб~еЕЙ=~кЙ=ÅçãéäÉíÉK
Important information
In these instructions for use the recommended
reference values for the operating speed refer
to appliances with a 7-setting rotary switch.
For appliances with a 4-setting rotary switch
you can find the values in brackets after
the values for a 7-setting rotary switch.
These instructions for use contain a sticker with
reference values for the operating speed of the
appliance when using the tools or accessories.
We recommend attaching this sticker to the
appliance (Fig.
).