General Pump MK Repair Manual - Manual (Page 13)

GENERAL PUMP
A member of the Interpump Group
MK SERIES
To separate the rod from the plunger guide, unfasten the M10 hexagonal-head screws using a size 17 socket
wrench (1, fig. 37).
2.1.2 Crank Mechanism Assembly
Proceed with assembly by inverting the precedure indicated in paragraph 2.1.1.
The correct sequence is the following:
Connect the rod to the plunger guide
Insert the Ø5 pin in the appropriate hole on the plunger guide (1, fig. 38) and connect the rod to the plunger
guide using M10 x 35 screws (1, fig. 39).
Page 13