General Pump MK Repair Manual - Manual (Page 22)

GENERAL PUMP
A member of the Interpump Group
MK SERIES
Page 22
Insert the key 16 x 10 x 90 in the pinion.
Insert the O-ring in the rear cover (1. fig. 74) and fasten it to the crankcase using 10 M8 x 18 screws
(1, fig. 75).
Calibrate the screws with the torque wrench as indicated in paragraph 3. “SCREW CALIBRATION”
Assemble the bearing cover (and related gasket) (1, fig. 76) using 8 M12 x 30 screws (1, fig. 77).
Calibrate the screws with the torque wrench as indicated in paragraph 3. “SCREW CALIBRATION”