Mk series – General Pump MK Repair Manual User Manual
Page 4
Advertising
GENERAL PUMP
A member of the Interpump Group
MK SERIES
Page 4
2.1.1 Crank Mechanism Disassembly
The correct sequence is the following
Completely drain the oil from the pump, then remove the key from the shaft (1, fig.2).
Unscrew the reducer flange fastening screws (1, fig. 3) and remove the flange from the shaft.
On the opposite side, unfasten the screws (1, fig. 4) and therefore remove the bearing cover.
Advertising