IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 66)

I NTELLI T RACK ISRP V 8.1
User Manual
38
Important: If security is not enabled, security rights are not enforced.
• Security is not enabled at application startup. Before you set security
rights for each system user, you must enable security. To enable secu-
rity, check the Enable Security check box. When enabled, security is
activated and the privileges defined in the Security tab are enforced. If
disabled, no security restriction is enforced and all defined privileges
are ignored.
• You are able to add system users and assign user tasks: everyone who
will use the system should be entered as a system user. This gives you
the ability to restrict the actions each user is allowed to perform by
assigning specific user tasks. Usually you will set up the user tasks at
the same time you add a user. However, user tasks can be changed at
any time.
• The system Admin user has rights to add users and assign user tasks. In
addition, the Admin user has rights to perform all user tasks. The
Admin user name and rights cannot be edited. Usually, the Admin user
adds users to the system and assigns user tasks. However, you may
assign this right to other users.
Adding a New
User An unlimited number of users may be added to the application. To add a
new user, refer to the instructions that follow:
1. From the Security tab of the System Options form, click the Add but-
ton in the User Security section of the form.