Levenhuk C800 NG Digital Camera, USB 2.0 User Manual
Page 103
Help Manual
95
Directly select a color by:
1) Dragging the
Color Value Slider
to the desired color on the
Color Bar
(range of 0 to
359°): or
2) Clicking the appropriate
Color
button on the
Color Palette
. The
Color Bar
represents
Color
degrees in the standard color wheel representation, and the
Color
Palette
contains a subset of possible
Colors
(pure red, green, blue, cyan, magenta,
and white): or
3) Select a dye in the dye list, and click the
Select Dye
button.
Note
: You can navigate through the
Select Color
dialog box by using the
<Tab>
and
<Shift + Tab>
keys to cycle through the items in the dialog box.
Intensity
is determined by the image the
Color
is applied to, and
saturation
will
always be 100%.
The only exception to this is the “white”
Color
, which has by definition a saturation of
0%. Selecting a value greater than or equal to 360 (dragging the
Color Value
slider
over to the far right) is a choice of white, which results in a non-tinted (gray) image.
The elements of the
Select Color
dialog box are:
Color Bar
: The
Color Bar
shows a rainbow displaying the
Colors
underneath the
appropriate point of the
Color Value
slider.
Note
: