5 parallel, Parallel – Levenhuk C800 NG Digital Camera, USB 2.0 User Manual
Page 114
Help Manual
106
Here you can edit the corresponding object parameters to modify its properties.
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or two selected objects. Its calculated output lists will depend on the two
selected object type (The type could be the same or could be different one).
14.5 Parallel
1. Choose
Measurements>Parallel
command;
2. Move mouse and click to mark the 1st point;
3. Move mouse and click to mark the 2nd point;
4. Move mouse and click to mark the 3rd point;
5. Move mouse again, one will find the 4th point is always restricted to parallel to the
line connecting point 1 and point 2. Click to mark the 4th point. Two parallel lines will
be labeled and numbered.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected