2 line> horizontal line, 3 line> vertical line, Line> horizontal line – Levenhuk C800 NG Digital Camera, USB 2.0 User Manual
Page 113: Line> vertical line
Help Manual
105
3. Move mouse to the 2nd point, click the left mouse to mark it again, a line with L1
and its length will be shown.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.4.2
Line> Horizontal Line
Draw a
Horizontal Line
between the two points on the specified layer.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.4.3
Line> Vertical Line
Draw a
Vertical Line
between the two points on the specified layer.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.