Levenhuk C800 NG Digital Camera, USB 2.0 User Manual
Page 37
Help Manual
29
4. Move the mouse until the cursor becomes
, this means the cursor is now
right on the
Object
. Clicking it will highlight and select the
Measurements Object
;
5. Optional 1: Continue to move the mouse until the cursor becomes
, this means
the cursor is now right on another object. Clicking it with
SHIFT+left mouse button
and the second object will be selected and highlighted;
6. Optional 2: (1) Move the cursor over the image, click down the left mouse button.
(2)Drag the mouse to draw a rectangle on the image. A dotted rectangle will appear
around the selected area. (3) Release the mouse and all of the
Measurement
objects
within the dotted rectangle will be highlighted and selected;
7. After the
Measurement
objects are selected, the
Edit>Copy
will be enabled;
8. Choose
Edit>Copy
to
Copy
the object(s) to the clipboard. Then the
Edit>Paste
menu will be enabled. One can then
Paste
the objects onto the
Current Layer
or onto
the other
Measurement Layer
. If one switches to the
Background Layer
, the
Paste
command will be disabled, but if one returns to the
Measurement Layer
, the
Paste
command will be enabled again.
Note
: 1) If there is no
Measurement
object selected, the
Edit>Copy
command will be
disabled.
Edit>Copy
will not delete the
Measurement
objects over the image. Any
data already existing on the clipboard will be replaced with the new data;
2) The copied object(s) can be pasted into the active window or into another
opened window using the
Edit>Paste
command as long as the current window is not
on the
Background Layer
(the command is disabled). See the
View>Sidebar>Layer