2 circle>two points, 3 circle>three points, 11 annulus – Levenhuk C800 NG Digital Camera, USB 2.0 User Manual
Page 119: Circle>two points, Circle>three points, Annulus
Help Manual
111
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.10.2 Circle>Two Points
Choose
Measurements>Circle>Two Points
to draw circle with
Two Points
method on
the specified layer.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.10.3 Circle>Three Points
Choose
Measurements>Circle>Three Points
to draw circle with
Three Points
method
on the specified layer.
Note
: 1) To check or modify the parameters of the selected object, just select a single
measurement object and the
Measurement
sidebar will be activated automatically.
Here you can edit the corresponding object parameters to modify its properties;
2) The
Appearance
,
Coordinates
on
Measurement
sidebar will be enabled only
when a single object is selected. The
Calculation
will be effective for a single selected
object or more selected objects. Its calculated items will depend on the selected
objects type (The type could be the same or could be different).
14.11
Annulus
1. Find
Annulus
center 1 and click mouse button to mark the
Annulus
center;
2. Move mouse to let the first circle superpose the image circle, clicking the mouse
left button;
3. Move mouse to let the second circle superpose the image circle, clicking the left