Safety information, Regulatory compliance – Staub Electronics WPS-300-DVR-16CH WIREPATH - 16 CHANNEL DVR WITH 1TB HDD User Manual

Page 4

Advertising
background image

SAFETY INFORMATION

• Handle this device with care. Do not strike or shake this device as this may damage it.
• Do not expose this device to water or moisture. Moisture may damage the device and also cause electric

shock. Do not operate it in wet areas. Take immediate action if the device becomes wet. Turn the power

off and refer servicing to qualified service personnel.
• Do not use this device near any heat sources such as radiators, heat registers, stoves or other apparatus that

produces heat.
• Protect the power cord from being stepped on or pinched particularly at the point where it connects to

the device and at the receptacle.
• Do not operate this device beyond its specified temperature, humidity or power source ratings.
• Use this device in humidity below 85%.
• The performance and lifespan of the hard drive is affected when used in high temperatures. It is

recommended to use this device within 68ºF ~ 86ºF.
• If mounting in a closed space, ventilation should be included. Do not block any ventilation openings.
• Handle the hard drive with care.
- It is possible to damage the hard drive if it is moved while the motor is still spinning. Do not move this

device after turning on the power. Follow the shutdown procedure (see Section 5.6) and wait at

least 30 seconds before moving this device even if it is to simply reposition it on a shelf or in a rack.
- If servicing or exchanging the hard drive, protect it from static electricity. Use a grounded static wrist

guard and matt to properly ground yourself before servicing the hard drive.

- Do not use an electric screw driver to remove or install a hard drive.
• Clean this device with a dry cloth. Do not use strong or abrasive detergents when cleaning the device

chassis. If dirt is hard to remove, use a mild detergent and wipe gently.
• Please make a note of the system settings and save them. This will help when required to change the
system configuration, or when unexpected failure or trouble occurs.
• Do not drop metallic parts through the ventilation slots. This could permanently damage the device.

If something falls inside the device, turn off the power immediately and contact qualified service personnel

for service.
• Distributing, copying, disassembling, reverse compiling, reverse engineering, or exporting the software

provided with this product, is expressly prohibited and in violation of the law.

THIS PUBLICATION COULD INCLUDE TECHNICAL INACCUACIES OR TYPOGRAPHICAL ERRORS. AT ANY TIME

CHANGES COULD BE MADE TO THE INFORMATION HEREIN FOR THE IMPROVEMENT OF THIS PUBLICATION

AND/OR THE CORRESPONDING PRODUCT(S).

REGULATORY COMPLIANCE

This product complies with the relevant standards for CE, FCC, and RoHS approval. The Power Adaptor/Supply

has been tested for compliance with UL, CSA, and CE standards.

Advertising
This manual is related to the following products: