Staub Electronics WPS-300-DVR-16CH WIREPATH - 16 CHANNEL DVR WITH 1TB HDD - Manual (Page 58)

58
WPS-300-DVR-9CH & 16CH Installation and Users Manual
- QCIF Fair – Lowest QCIF Resolution
- QCIF Normal – Medium QCIF Resolution
- QCIF Fine – High QCIF Resolution
- QCIF Super fine – Best QCIF Resolution
6.11 FACTORY DEFAULT
To reset all the DVR settings to factory default values, press ▲▼◄► on the front panel of the DVR or on the
remote control to change the highlighted option to Factory Default and then press ENTER. Alternatively use
the mouse to select Factory Default. Once selected, a confirmation dialog will be shown, press ENTER again to
make the changes. Or select ESC, or right-click the mouse to exit without resetting the DVR.
WARNING: All settings will be lost and replaced with factory default settings.
Settings cannot be recovered after a Factory Default.