Staub Electronics WPS-300-DVR-16CH WIREPATH - 16 CHANNEL DVR WITH 1TB HDD - Manual (Page 54)

54
WPS-300-DVR-9CH & 16CH Installation and Users Manual
• DDNS Type
Starting with Version 7.75.53 a new selection will appear for WirepathDNS. It is strongly recommended that this
option is used to simplify configuration.
Using the WirepathDNS is easy. Select WirepathDNS from the list and enter the client name or other unique
string in the URL. When exiting the Network menu, confirm the changes. A DDNS service is setup automatical-
ly. See DVR Local Display Menu Setup in Appendix E – WirepathDNS Setup for details on using WirepathDNS.
• URL
Enter the DDNS URL if DDNS is used. – Enter Client Name or System Name to identify the DVR.
• DDNS Username
Enter the DDNS Username if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS service
is configured.
• DDNS Password
Enter the DDNS Password if DDNS is used. – Not used unless an existing DDNS other than WirepathDNS service is
configured.
• E-mail
Press ENTER on the front panel of the DVR or on the remote to display the E-mail Setup menu. Alternatively use
the mouse to enter this menu. Refer to Section 6.10.1 for details.
• FTP
Press ENTER on the front panel of the DVR or on the remote to display the FTP Setup menu. Alternatively use
the mouse to enter this menu. Refer to Section 6.10.2 for details.
• ADV.
Press ENTER on the front panel of the DVR or on the remote to display the Advanced Network Setup menu.
Alternatively use the mouse to enter this menu. Refer to Section 6.10.3 for details.
6.10.1 E-MAIL SETUP
The E-mail Setup allows the administrator to set e-mail related parameters. When an event occurs and E-mail is
enabled for the corresponding action, an e-mail will be sent based on the parameters set in this menu.
In Network Setup, press ENTER to display E-mail Setup as shown when the highlighted option is E-mail.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item.
Alternatively use the mouse to select an item.