Staub Electronics WPS-300-DVR-16CH WIREPATH - 16 CHANNEL DVR WITH 1TB HDD User Manual
Page 7
7
WPS-300-DVR-9CH & 16CH Installation and Users Manual
VGA
HDMI
ESATA
ALARM
OUT
G
G
G
G
-
+
G
RS-485
C
DC12V
POWER
11. CALL-AUX Connectors (CALL-AUX IN/OUT)
Used to daisy-chain to Multiple DVR call outputs. CALL-AUX OUT has the same output as CALLOUT, but
can be switched off through RS-232 control.
12. Call Monitor Output Connector (CALL OUT)
Connect TV monitor to this BNC connector for call monitor display
13. ESATA
Connection to external drive or PC with an ESATA connection for additional storage.
14. HDMI (Main Out)
Main monitor display for connection to HDMI TV or monitor for setup, control and monitoring of cameras
and system.
15. VGA Connector
Main monitor display for connection to VGA monitor for setup, control and monitoring of cameras
and system.
16. Alarm Out - RS-485 Connector
1- Alarm Output Connectors (ALARM OUT 1-4)
Connect to 2 Normally Closed (NC) alarm outputs
(1-2) and 2 Normally Open (NO) alarm outputs (3-4).
2- RS-485 Connector
Connect to RS-422/485 compatible PTZ camera(s)
or keyboard.
17. Alarm Input Connectors (ALARM IN 1-16)
Connect to external devices such as motion sensors or door switches.
18. Ethernet Connector
Connect to a 10/100Base-TEthernet network for remote access and integrated control and video streaming
to Automation Systems.
19. NTSC/PAL Selector Switch
Sets the video output to NTSC or PAL-based on your local TV system.
20. RS-232 Connector
Connection for data and control via an external control system such as Control4, Crestron or AMX.
6a
7
8
9
13
14
12
11
10