Staub Electronics WPS-300-DVR-16CH WIREPATH - 16 CHANNEL DVR WITH 1TB HDD - Manual (Page 99)

99
WPS-300-DVR-9CH & 16CH Installation and Users Manual
The following is a brief description for each item in this menu and its specific operations:
• SERVER URL
Enter the FTP server web/IP address.
• FTP PORT
Enter the FTP port number. The default value is 21.
• USERNAME
Enter the username for the FTP server.
• PASSWORD
Enter the password for the FTP server.
• PREFIX OF FILENAME
Enter the prefix of the filenames for files sent to the FTP server. If this box is left empty, the filenames will
start with “cam” If a prefix such as “Prefix” is entered, the filenames will be “Prefix-cam” For another
example, if the prefix is “DVR01”, then the filenames will begin with “DVR01-cam.”
9.3.14 HDD
Alarm-triggered video and audio is typically more important than non-even normal video and audio recording
in surveillance applications. The DVR is designed to allow the hard drive to be partitioned into an alarm partition
and a normal partition. Partitions can only be set from the VGA or BNC main display (See Section 6.6). Alarm
video and audio will be recorded in alarm partition and normal video and audio will be recorded in the normal
partition.
HDD Setup in Internet Explorer allows the administrator to define the behavior for Alarm Record and Normal
Record partitions if the hard drive becomes full.
The following is a brief description for each item in this menu and its specific operations:
• HDD FULL ACTION
Based on the hard drive status, the DVR can sound the buzzer, log the event and email an alert when the
hard drives reaches its maximum capacity.