Aiwa HV-FX9000U - Manual (Page 14)

ENGLISH
V
U
75-ohm 300-ohm
VHF UHF
AERIAL
(VHF/UHF)
RF OUT
AERIAL
(VHF/UHF)
RF OUT
OUT IN
V
U
75-ohm 300-ohm
VHF UHF
5
CATV connections
To connect a CATV system without using a CATV converter
1
2
3
Connect the cable from the CATV system to the AERIAL connector on this
VCR.
Connect the supplied antenna cable to the RF OUT connector on the VCR
and the antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
Connect the AC cord to the AC outlet.
1
2
3
CATV system
75-ohm coaxial cable
(not supplied)
1
2
3
To AC outlet
To antenna connector
Antenna cable
(supplied)
TV TV
To VHF antenna
terminal
To UHF antenna terminal
Antenna splitter (not supplied)
CATV system
75-ohm
coaxial cable
(not supplied)
CATV converter
(not supplied)
1
2
TV
Antenna cable
(supplied)
75-ohm coaxial cable
(not supplied)
To antenna connector
3
4
To AC outlet
4
To connect a CATV system using a CATV converter
Connect the cable from the CATV system to the input connector on the CATV converter.
Connect the output connector on the converter to the AERIAL connector on this VCR.
Connect the supplied antenna cable to the RF OUT connector on the VCR and the antenna
connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
Connect the AC cord to the AC outlet.
AC cord
AC cord
TV
Connecting the VCR (continued)
Antenna splitter
(not supplied)