Aiwa HV-FX9000U - Manual (Page 15)

ENGLISH
OUT IN
AERIAL
(VHF/UHF)
RF OUT
Connect the cable from the CATV system to the 2-way splitter.
Connect one of the output connector of the splitter to the input connector
of the CATV converter, and the other to the A/B switch.
Connect the output on the converter to the AERIAL connector on this
VCR.
Connect the RF OUT connector on this VCR to the A/B switch using the
supplied antenna cable.
Connect the A/B switch to the antenna connector on your TV.
Connect the AC cord to the AC outlet.
1
2
4
3
5
6
CATV system
2-way splitter
(not supplied)
CATV converter
1
2
3
75-ohm coaxial cable
(not supplied)
2
75-ohm coaxial cable (not supplied)
To AC outlet
6
75-ohm coaxial cable (not supplied)
Antenna cable
(supplied)
4
A/B switch
(not supplied)
75-ohm coaxial cable (not supplied)
5
To antenna connector
TV
AC cord
To connect a CATV system using a CATV converter and 2-way splitter
Note
When you use a CATV converter,
refer to the Instructions of it.
6
CONTINUE