Aiwa HV-FX9000U - Manual (Page 3)

2
LINE 1
R AUDIO L
OUT OUT
IN IN
(MONO)
VIDEO
AERIAL
(VHF/UHF)
RF OUT
2
Connecting Antenna (or CATV)-VCR-TV
Important
Connect the AC cord to the AC outlet after all of the connections are complete.
2
Connect the VCR with the
supplied antenna cable to the
TV's antenna input connector.
1
Connect the TV
antenna cable (not
supplied) to the
VCR.
AC outlet
Antenna input
connector
TV
3
If your TV has audio/video
input jacks, connect the VCR
and TV using the supplied
audio and video cables.
Basic connections
4
Connect the AC cord
of the VCR to the AC
outlet.
When the TV is connected to OUT TO TV using only an antenna cable
Set the channel selector to 3CH or 4CH, not employed for broadcasts, and select the same channel on the TV.
Audio/video
input jacks
To select a desired TV channel on the TV
Turn the TV and VCR on, and press TV/VCR to turn off
VCR in the display window, or turn off this VCR.
AERIAL AERIAL
(VHF/UHF) (VHF/UHF)
RF OUT RF OUT
3CH 4CH
3CH 4CH
Video cable
(supplied)
Audio cable
(supplied)
Antenna cable
(supplied)
TV antenna cable (not supplied)
AC cord