Vanguard ATRT-03_03B - Manual (Page 68)

REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
62
3.7.2. Reviewing a Test Record
You can print (ATRT-03 and ATRT-03A only) or display (all models) a test record at the time that
it is restored, or you can restore it to the working memory and review it later. To print or
display the current test record in the working memory:
a. Perform a test or restore a test record to the working memory (see section 3.4) and
then start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [2] key (REVIEW RECORD).
If using an ATRT-03 or ATRT-03A, continue to step c.
If using an ATRT-03B, continue to step d.
c. The following screen will be displayed:
Press the [1] key (SCROLL TEST RECORD) to display the test record data on the unit’s
LCD screen. Continue to step d.
Press the [2] key (PRINT TEST RECORD) to print the restored test record on the unit’s
built-in thermal printer. The following screen will be displayed:
Press the [1] key (COLUMN) to print the test record in columnar format, or press the [2]
key (DETAILED) to print the test record in detailed format. The test record will be
printed, and you will be returned to the “START-UP” menu.
PRINT FORMAT?
1.COLUMN
2.DETAILED
REVIEW RECORD
1.SCROLL TEST RECORD
2.PRINT TEST RECORD
1.ENTER XFMR ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT
1.TEST XFMR 08/23/10
2.SETUP 08:25:15
3.CALCULATOR
4.DIAG 5.QUICK TST