Vanguard ATRT-03_03B User Manual
Page 84
REV 7 ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL
78
3.8.4. Printing a Test Plan (ATRT-03 and ATRT-03A Only)
Follow the steps below to print a test plan from the internal Flash EEPROM (ATRT-03 and ATRT-
03A only):
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[4]
key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[4]
key (TEST PLANS).
d. The following screen will be displayed:
Press the
[4]
key (PRINT TEST PLAN).
1.LOAD TEST PLAN
2.UNLOAD TEST PLAN
3.PLAN DIRECTORY
4.PRINT TEST PLAN
1.COMPUTER CONTROL
2.SET TIME
3.SET TEST VOLTAGE
4.TEST PLANS
1.ENTER XFMR ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.TEST XFMR 08/23/10
2.SETUP 08:25:15
3.CALCULATOR
4.DIAG 5.QUICK TST