Vanguard ATRT-03_03B - Manual (Page 75)

ATRT-03, ATRT-03A, AND ATRT-03B USER’S MANUAL REV 7
69
3.8 Working With Test Plans
The ATRT-03 comes with the Vanguard Transformer Turns Ratio Analyzer software (TTRA) that
can be used to create transformer test plans on a PC (see the TTRA software manual for
details). Test plans can then be transferred to the ATRT-03 and used to quickly perform tests.
3.8.1. Performing a Test Using a Transformer Test Plan
Follow the steps below to perform a test using a test plan:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the [4] key (NEXT PAGE).
c. The following screen will be displayed:
Press the
[4]
key (TEST PLANS).
d. The following screen will be displayed:
Press the [1] key (LOAD TEST PLAN).
1.LOAD TEST PLAN
2.UNLOAD TEST PLAN
3.PLAN DIRECTORY
4.PRINT TEST PLAN
1.COMPUTER CONTROL
2.SET TIME
3.SET TEST VOLTAGE
4.TEST PLANS
1.ENTER XFMR ID
2.REVIEW RECORD
3.RESTORE RECORD
4.NEXT PAGE
1.TEST XFMR 08/23/10
2.SETUP 08:25:15
3.CALCULATOR
4.DIAG 5.QUICK TST