Agilent Technologies N9010A - Manual (Page 279)

279
32 TD-SCDMA Measurement Application
This chapter contains specifications for two measurement applications. One of those is the N9079A-1FP
or N9079A-1TP TD-SCDMA measurement application. Modulation specifications rows and columns
labeled with DPCH apply to TD-SCDMA only. The other application is the N9079A-2FP or
N9079A-2TP HSPA/8PSK measurement application. Modulation specifications rows and columns
labeled with HS-PDSCH apply to HSPA/8PSK only.
Additional Definitions and Requirements
Because digital communications signals are noise-like, all measurements will have variations. The
specifications apply only with adequate averaging to remove those variations.
The specifications apply in the frequency range documented in In-Band Frequency Range.
The specifications for this chapter apply only to instruments with Frequency Option 503, 507, 513 or
526. For Instruments with higher frequency options, the performance is nominal only and not subject to
any warranted specifications.