Agilent Technologies N9010A - Manual (Page 83)

83
3 VXA Vector Signal and WLAN
Modulation Analysis Application
This chapter contains specifications for the N9064A
1
VXA vector signal and WLAN modulation
analysis measurement application.
Additional Definitions and Requirements
Because digital communications signals are noise-like, all measurements will have variations. The
specifications apply only with adequate averaging to remove those variations.
The specifications apply in the frequency range documented in In-Band Frequency Range.
The specifications for this chapter apply only to instruments with Frequency Option 503, 507, 513 or
526. For Instruments with higher frequency options, the performance is nominal only and not subject to
any warranted specifications.
Specs & Nominals
These specifications summarize the performance for the X-Series Signal Analyzer and apply to the VXA
measurement application inside the analyzer. Values shown in the column labeled "Specs & Nominals"
are a mix of warranted specifications, guaranteed-by-design parameters, and conservative but not
warranted observations of performance of sample instruments.
1. In software versions prior to A.06.00, the VXA measurement application product number was 89601X. Software
versions A.06.00 and beyond have renamed 89601X to N9064A.