ADTRAN 1202076L2 - Manual (Page 4)

FCC REGULATIONS REQUIRE THAT THE FOLLOWING INFORMATION BE
PROVIDED TO THE CUSTOMER IN THIS MANUAL
1. This equipment complies with Part 68 of the FCC rules. The required
label is attached to the bottom of the chassis.
2. An FCC compliant telephone cord and modular plug is provided
with this equipment. This equipment is designed to be connected to
the telephone network or premises wiring using a compatible modu-
lar jack which is Part 68 compliant. See installation instructions for
details.
3. If your Product causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If possible,
they will notify you in advance. If advance notice is not practical, you
will be notified as soon as possible. You will be advised of your right
to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equip-
ment, operations, or procedures that could affect the proper opera-
tion of your equipment. If they do, you will be given advance notice
so as to give you an opportunity to maintain uninterrupted service.
5. If you experience trouble with the equipment Product, please contact
ADTRAN at (256) 963-8000 for repair/warranty information. The
telephone company may ask you to disconnect this equipment from
the network until the problem has been corrected, or until you are
sure the equipment is not malfunctioning.
6. This unit contains no user serviceable parts.
7. The following information may be required when applying to your
local telephone company for leased line facilities.
Service Type REN/SOC FIC USOC
1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C
1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C
1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C
1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C