ADTRAN 1202076L2 - Manual (Page 73)

Chapter 5. Configuration Menu
61202076L1-1 TSU 600 User Manual 5-13
Create Temp Example
A sample selection follows for Create Temp :
DS0: 01 to 24
PORT: IDLE , TST , + option module ports
TST designates which DS0s are used for QRSS testing when activated
under the TEST Menu. When not used for testing, the TST designation
is identical to IDLE .
REVIEW MAP
A(B) Permits a quick review of the number of
DS0s assigned to each port and the number
of unassigned DS0s (
Idle or TST ) as defined
in the currently applied Map A(B).
REVIEW TEMP This menu item is operated the same for
the Temp map as is 3)REVIEW MAP A or
Map B.
EDIT TEMP The map in the Temp file can be edited to
whatever configuration is desired. If Map
A had been copied into the Temp file, then
after editing, the Temp file could be
applied to MAP A or MAP B. The menu
operation is identical to
2) CREATE TEMP
with the exception that the existing port
selections display.
APPLY TEMP > A Writes the Temp map into Map A. Pressing
Apply
is usually the last step in updating a
map and is accessed automatically at the
end of editing or creating a temporary
map. It can be bypassed at this time by
selecting another menu choice.