ADTRAN 1202076L2 - Manual (Page 78)

Chapter 6. Utility Menu
6-2 TSU 600 User Manual 61202076L1-1
Menu flow is normally depicted from left to right. Arrows on the lower
right of the screen indicate the scrolling direction to view additional
menu items. At every level of the menu, press Cancel to return the sys-
tem to the previous menu level. Pressing Cancel repeatedly returns the
system to the Main menu.
Time/Date
This menu option displays or edits the current time and date. The TSU
600 maintains the time and date during power-off conditions.
Factory Restore
This menu item restores the factory default settings for all unit parame-
ters, including configured DS0 maps.
Set Passcode
Enter Passcode from Other Menus
The Passcode prompt may make an unexpected appearance from oth-
er menu operations. This happens only when the unit is operating in the
limited access mode, i.e., without an active passcode. The limited access
mode may become active even if a passcode was entered, as it does
when there is no activity for ten minutes. If the unit is to be remotely ac-
cessed using T-Watch PRO, a passcode must be entered. When manag-
ing a number of units, the passcode can be the same for all.
The unexpected appearance of the Passcode prompt occurs, for exam-
ple, while operating in a limited access mode and attempting to change
the data rate,
(2)CONFIG, 2)UNIT, 1)CTL PORT RATE . Use the number
keys to enter the correct passcode and press Enter. The unit displays
Access Granted .
If you want to... Do this...
Record the entry and
move to the next editing
position Press Enter after any numeric change
Move to a different field
to edit Press Enter at the editing position without
making any changes, or
Use the Up and Down Arrow keys
End the editing process Press Cancel