Functional enhancement of the recorder, Trademarks – Yokogawa µR20000 User Manual
Page 3
ii
IM 04P01B01-17E
Trademarks
• All the brands or names of Yokogawa Electric’s products used in this manual are
either trademarks or registered trademarks of Yokogawa Electric Corporation.
• Microsoft, MS-DOS, Windows, Windows NT, and Windows XP are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries.
• Adobe, Acrobat, and PostScript are trademarks of Adobe Systems incorporated.
• For purposes of this manual, the TM and ® symbols do not accompany their
respective trademark names or registered trademark names.
• Other company and product names are trademarks or registered trademarks of their
respective holders.
Functional Enhancement of the Recorder
The functions of the recorder have been added or changed as shown in the figure below.
You can check the system version on the system display. For details, see the µR10000
User’s Manual (IM 04P01B01-01E) or the µR20000 User’s Manual (IM 04P02B01-01E).
Version Suffix Code
Added or Modified Functions
Reference
µR10000 only
1.11
–
(Changed) Expanded the selectable range of alarm values during
linear scaling (including 1-5V and SQRT) to
–5% to 105% of the scale.
Sec. 4.4: SA command
–
(Changed) The procedure to set the start/end date and time of
Daylight Saving Time (DST) has been changed.
The TD command can be used on the µR20000 and
the µR10000 with system version 1.11.
The SS command can be used on the µR10000 with
system version 1.02 or earlier.
Sec. 4.4: TD command
–
(Added)
The printout/display format of the date can be
changed.
Sec. 4.5: XN command
/C3
(Changed) Modbus slave protocol can be used. Two-wire system. Sec. 4.5: YS command
Sec. 3.2
/C7
(Changed) Users with the same user name cannot be registered. Sec. 2.5
Common to µR10000 and µR20000
1.21
-2
(Added)
Language support (German and French).
Sec. 4.5: UL command
/CC1
(Added)
Calibration Correction.
Sec. 4.4: VL command
Sec. 4.5: UQ and UF commands
1.31
–
(Added)
Customized menu.
Sec. 4.5: UG and UH commands
/BT1
(Added)
Header printout.
Sec. 4.4: VH, VC, VP, VA, VM,
and VD commands
Sec. 4.5: UE and XR commands
–
(Added)
Hold registers 40301 to 40348 (floating type
register for communication input data) for Modbus
communication.
Sec. 3.4