Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 34)

3. Attach the front right bracket to the rail rack using two 10-32 x 5/8 in. screws and the appropriate
round or square retainer nuts.
FIGURE 22 Installing the device, flush rail mounting
FIGURE 23 Installing the device, mid rail mounting
4. Repeat Step 1 to Step 3 to attach the left front bracket to the left front rack rail and tighten all
10-32 x 5/8 in. screws to a torque of 25 in-lb (29 cm-kg).
Installing the ICX 6610 Switch
32 Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003082-02