Brocade ICX 6610 Stackable Switch Hardware Installation Guide - Manual (Page 69)

Connecting network devices
Brocade devices support connections to other vendors’ routers, switches, and hubs, as well other
Brocade devices.
Connectors
For port pinouts, refer to Pinouts and signalling section.
Cable specifications
Refer to Cable specificationssection for cable lengths and types.
Connecting to Ethernet or fast Ethernet hubs
For copper connections to Ethernet hubs, a 10/100BaseTX or 1000BaseT switch, or another Brocade
device, a crossover cable is required. If the hub is equipped with an uplink port, it will require a straight-
through cable instead of a crossover cable.
Connecting network devices
Brocade ICX 6610 Stackable Switch Hardware Installation Guide 67
53-1003082-02